Publicité
Mounting the unit to a wall mount or mounting
arm
Warning
Be sure to set the tightening torque value to
the following value.
Torque value: 1.7±0.1 N·m
Make sure the tightening torque value is at this
value. If the torque value is not appropriate, the
mounting part may become damaged or the
screws may become loosened, and in the worst
case, it may cause injury or damage to the unit
due to the unit falling.
The supplied screws are accommodated
mounts with a thickness of 1 to 3 mm (
1
/
inches). When securing them to other
8
objects, refer to the figure shown above and
use the screws recommended for the attached
object.
When mounting the unit to objects such as
movable mounting arms, if excessive force is
applied, the mounting part may become
damaged, and in the worst case, it may cause
injury or damage to the unit due to the unit
falling. To use the monitor with the movable
mounting arm, hold the handle of the
mounting arm to move the monitor and avoid
applying excessive force to the mounting part.
* Length of M6 screws (4)
9
7 (
/
) to 10 (
32
Monitor cabinet
1
/
to
16
13
/
)
32
M6 screw
Attached object
Unit: mm (inches)
17
GB
Specifications
Publicité
