CYBEX ATON 2 Mode D'emploi page 58

4. Turn the male side of the Chest Clip over and loosen screws
with a small Phillips screwdriver. Remove the cover
b
5. Remove Circuit Board from Chest Clip. Remove Battery
from Circuit Board. Replace Battery with new Panasonic™ **
CR2032 Lithium button cell Battery, as shown.
6. Place the Circuit Board with the new Battery in the
Chest Clip. Replace the Cover and tighten the screws.
This completes the battery replacement process.
7. If you have questions, please contact CYBEX at: 1-937-773-3971
or online at: www.cybex-online.com
4
5
a
** Trademarks are the property of their respective owners.
Using SensorSafe (Cont.)
a
.
c
b
CR2032
c
2
1
b
55