CYBEX ATON 2 Mode D'emploi page 27

WARNING! DEATH or
SERIOUS INJURY can occur
If possible, INSTALL the Aton 2 Base in a seating position that
will allow the Load Leg Foot to be extended into a LOCKED
position with firm contact with the vehicle floor.
NEVER INSTALL the Aton 2 Base in a seating position where
the Load Leg, even in its shortest position, causes the Base to
be pushed up above the vehicle seat. If necessary, the Base
may be installed with the Load Leg folded up underneath.
The REAR SEAT is the safest location for a properly installed
child restraint.
Use this child restraint in FORWARD FACING VEHICLE SEATS
ONLY.
The Aton 2 is allowed to touch the vehicle seat(s) in front of it, as long the recline angle of the
Aton 2 is not affected.
The best position for the child restraint is one that is recommended by your vehicle Owner's
Manual AND allows a proper and secure installation of the restraint every time. If possible,
have an adult ride in the rear with the child in order to monitor the child.
24
Vehicle Seat Location Requirements
?
?