Publicité
Les langues disponibles
Les langues disponibles
11.4 Maintaining enamel, stainless steel,
chrome and powder coated parts
The appliance is composed of enamelled, stainless steel,
chromed and powder coated parts. Each material has to be
maintained diffe ently:
Material
Enamel
•
•
•
Stainless steel
•
and chrome
•
•
•
•
Powder coated
•
To prevent formation of rust on stainless steel, avoid
contact with chlorine, salt and iron. We recommend not
using the appliance near the coast, near railways or near
swimming pools.
Damages caused by not following these instructions are
regarded as inadequate maintenance and are not covered
by the warranty.
Below the exploded view of your appliance (second part of the
manual), you find a list with all pa ts of which the appliance is
composed. This list includes a symbol that specifies the ma erial
of each part, so you can use it to check how you have to maintain
a particular part. The parts list uses the following symbols:
Symbol
Enamel
Chrome
Stainless steel
Powder coated
11.5 Storing the appliance
lf you do not use your appliance for a longer period of time, store
it in a dry place. Before you store the appliance:
•
Disconnect the gas cylinder. Never store your appliance
indoors (not even in a garage or shed) as long as it is
connected to the gas cylinder.
•
Clean the burners and the grills, rub them with oil and wrap
them in paper.
•
Cover your appliance with a Barbecook cover. Register your
appliance at www.barbecook.com to find out which cover
you need.
11.6 Storing gas cylinders
These instructions apply to both empty and full gas cylinders.
•
Always store gas cylinders outdoors, in a well-ventilated
area. Make sure they are not exposed to excessive heat or
direct sunlight.
14
How to maintain this material
Do not use sharp objects and do
not knock against a hard surface.
Avoid contact with cold liquids
while still hot.
You can use metal sponges and
abrasive detergents.
Do not use aggressive, abrasive or
metal detergents.
Use soft detergents and let them
act on the steel.
Use a soft sponge or cloth.
Rinse thoroughly after cleaning
and dry well before storing.
Do not use sharp objects. Use soft
detergents and a soft sponge or
cloth.
Rinse thoroughly after cleaning
and dry well before storing.
Material
•
Never store a gas cylinder in an area that can become very
hot (in a car, on a boat...).
•
Never store your gas cylinder or spare gas cylinder in the
cabinet of your appliance.
•
Never store your spare gas cylinder near a gas appliance in
use.
•
Always store gas cylinders outside the reach of children.
•
Always store and transport gas cylinders in upright position.
11.7 Ordering spare parts
Parts that are directly exposed to fire or intense heat have to be
replaced from time to time. To order a spare part:
1.
Look up the reference number of the part you need. You find
a list of all reference numbers below the exploded views in
the second part of this manual and on www.barbecook.com.
If you registered your appliance online, you will
automatically be guided to the correct list in your
MyBarbecook account. There you have the possibility to
order your parts online.
2.
Order the spare part via www.barbecook.com or at your
point of sale. Parts under warranty can only be ordered at
your point of sale.
12 WARRANTY
12.1 Covered
Your appliance comes with a warranty of two years, starting from
the date of purchase. This warranty covers all manufacturing
defects, provided that:
•
You used, assembled and maintained your appliance
according to the instructions in this manual. Damages
caused by misuse, incorrect assembly or inadequate
maintenance are not regarded as manufacturing defects.
•
You can present the receipt and the unique serial number of
your appliance. This serial number starts with a G, followed
by 15 digits. You can find it:
-
On this manual.
-
On the packaging of the appliance.
-
On the inside of the cabinet door.
•
The Barbecook quality department confirms that the parts
are defective and that they proved defective under normal
use, correct assembly and adequate maintenance.
lf one of the above conditions is not met, you cannot claim any
form of contribution. In all cases, the warranty is limited to the
repair or replacement of the defective part(s).
12.2 Not covered
The following damages and defects are not covered by the warranty:
•
Normal wear and tear (rusting, distortion, discolouration...)
of parts that are directly exposed to fire or intense heat. It is
normal to replace these parts from time to time.
•
Visual irregularities that are inherent to the manufacturing
process. These irregularities are not regarded as
manufacturing defects.
•
All damages caused by inadequate maintenance, incorrect
storage, improper assembly or modifications made to
pre-assembled parts.
•
All damages caused by misuse and abuse of the appliance
(not using it according to the instructions in this manual,
using it for commercial purposes, using it as a fire basket...).
•
All consequential damages caused by careless or
non-compliant use of the appliance.
•
Rust or discolouration caused by external influences, the
use of aggressive detergents, exposure to chlorine... These
damages are not regarded as manufacturing defects.
Publicité
