Publicité
Les langues disponibles
Les langues disponibles
Battery Charging
Remove the battery from the vehicle before charging.
Connect the positive and negative wires from the charger and charge the battery at a rate 1/10th Amp of
the battery capacity. For example, the charging rate for a 10 Amp-hour battery would be 1.0 ampere.
Ensure that the battery is fully charged before installation.
Do not mount an ordinary battery in this motorcycle, or the electrical system will not work properly.
When removing the battery, firstly disassemble the negative pole, and then the positive pole. During
mounting, the connection sequence of positive and negative poles is opposite to that of disassembly.
NOTE:
When charging a maintenance-free battery, always follow the instructions in this manual.
ELECTRICAL SYSTEM AND LIGHT SIGNALS
WARNING
140
Publicité
