Publicité
Les langues disponibles
Les langues disponibles
NOTE:
Inspect the tire pressure when the tires are cold.
Tire pressure is affected by the change of environment temperature and altitude. If the environment
temperature and altitude have a big change during riding, tire pressure should be adjusted and inspected
accordingly�
Most countries have their own regulations of minimum tread depth. Please follow local regulations. When
mounting new rims or tires, always inspect the wheel balance of the tires.
In order to ensure safe and stable operation, please only use the tire and pressure recommended. If the
tire is punctured and repaired, please do not ride the vehicle at over 100 km/h until 24 hours after, and the
speed cannot exceed 130 km/h at any other time.
The front and rear tires should come from the same manufacturer with the same tread pattern.
New tires can be slippery and may cause a loss of control and injury. Please ride the vehicle in proper
ways and use different tilt angles to have the tires create friction with the ground over the entire surface.
Normal friction surface will be formed after a 200 km break-in period. Avoid sudden braking, heavy
acceleration, and high-speed sharp turns during the break-in period.
Below the tire valve is tire pressure detection system. When adjusting the tire pressure or servicing the
tire, avoid damaging tire pressure detection system. Tire repair fluid, anti-puncture fluid and other items
that may hinder air from entering the tire pressure sensor, which may affect tire pressure sensor and
could cause irreversible damage.
TIRES AND CHAINS
CAUTION
121
Publicité
