Publicité
Les langues disponibles
Les langues disponibles
BRAKE SYSTEM
Brake Disc Inspection
Inspect brake discs periodically for any damage, out of shape,
cracks or wear. Damaged brake discs may cause braking
failure. Worn-out brake discs will decrease braking performance.
If brake discs are damaged or exceed the wear limit, contact an
authorized dealer to replace them with new ones immediately.
Inspect the thickness of front and rear brake discs in several
positions�
Front and rear brake discs wear limit: 0�16 in� ( 4mm )
Brake Caliper Inspection
Inspect the brake calipers before riding. Inspect the brake pads
for minimum thickness periodically. If the brake pad is too thin,
it will cause the steel plate to rub the brake discs, which will
severely reduce brake effect and damage the brake system.
Inspect the minimum thickness of brake pads on all brake
calipers�
Brake pad minimum thickness: 0�05 in (1�3 mm)
If the brake pad thickness is less than the minimum limit, or the
brake pads are damaged, please contact an authorized dealer
immediately to replace the pads in pairs�
131
Publicité
