Publicité
Les langues disponibles
Les langues disponibles
Wear inspection
Shift the gear into Neutral.
Support the vehicle with the side stand.
Apply chain tensioning or hanging a 22 lb (10 kg) object on the
chain�
Measure the elongated length between 20 links.
If the measured length exceeds the standard limit, replace the
chain with a new one�
Standard limit: 12�6 in (320�7 mm)
For your safety, please use the standard chain. When the chain
is elongated, never cut the chain and use it again. Have it
replaced by an authorized CFMOTO dealer.
Inspect the rear sprocket and engine sprocket tooth surface for
any kind of wear�
If the engine sprocket or rear sprocket is worn, then replace the
whole set of the transmission�
Inspect chain guard for wear. Inspect chain tightness if chain
guard is worn. Replace chain and chain guard if necessary.
TIRES AND CHAINS
DANGER
126
320�7 mm
20 links
Standard Teeth
Wear Teeth
Damaged Teeth
Publicité
