Télécharger Imprimer la page

Etac Molift Air 200 Manuel D'utilisation page 10

Masquer les pouces Voir aussi pour Molift Air 200:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 78
Molift Air 200/350 | BM16199 Rev L | www.etac.com
Service scope
When the hoist has performed a number of lifts, (5,000 lifts with
the maximum allowed weight (SWL)), the service indicator will
light up red.
A service must then be performed by authorized personnel,
including the inspection and replacement of worn parts.
Contact Etac or your local dealer or visit etac.com to find an
approved service partner.
Charging
Molift Air can be charged through the hand control with a bat-
tery charger, or through the rail with In Rail Charging.
Indicator on charger and power supply indicator
Charger indicator
Green flash
Yellow
Yellow flash
Green
Power supply indicator Mode
Blue
Hand control charging
The battery charger is plugged into a power outlet. Wall-mounted
docking for hand control is available. Make shure not to damage
the cable. The charger can be connected to the power outlet
at all times. Use only Molift chargers. The Hand control has an
indicator light that will illuminate when battery level is low and
the hoist requires charging.
Charger for Molift Air hand control: Art. no.: 2540100
Battery indicator
Hand Control
Wall Mounted Docking
Charging cable
Mode
Not connected to hoist
Charging
Top of charge
Fully charged
Connected to power
outlet
IRC - In Rail Charging
The hoist is charged through a built in charger in lift motor for
continuous charging through the entire rail system length.
Molift Air IRC has a built in charger, connected to the battery. It
must be installed with IRC Trolley in a rail system with a conduc-
tive tape. The IRC trolley is connected to the battery charger
inside the Molift Air IRC. The IRC trolley is always in contact with
the the conductive tape inside the rail. The IRC power supply is
connected to the conductive tape through IRC connection at the
end of the rail, and supplies power to the battery charger inside
Molift Air IRC.
Trolley
IRC
IRC fits both Single rail and Traverse systems.
Trolley
IRC
IRC connection RH62
connected to IRC power supply
IRC Power Supply
Art. no.: 2510119
Charger 3844 DC/DC (Part of Molift Air IRC)
Art. no.: 2640101
7
Conductive
Tape
IRC connection RH62
connected to IRC power supply
Conductive
Tape
Traverse
trolley IRC
IRC connection RH112
Connected to
traverse trolley
Conductive
Tape

Publicité

loading

Ce manuel est également adapté pour:

Molift air 350