Télécharger Imprimer la page

Stihl RE 80.0 Notice D'emploi page 6

Masquer les pouces Voir aussi pour RE 80.0:

Publicité

Les langues disponibles

Les langues disponibles

English
■ To reduce the risk of electric shock:
► Wear rubber-soled footwear that provides
insulation when operating the pressure
washer.
■ Aqueous aerosols may form while working
with a pressure washer. Inhalation of some
aerosols can be hazardous. To determine the
measures necessary to protect against aque‐
ous aerosols, carry out a risk assessment
before starting work. Depending on your risk
assessment, class FFP2 or higher respirators
may be necessary.
5.5
Pressure Washer
WARNING
■ To reduce the risk of serious or fatal injury
from electrocution or electric shock:
► Position the pressure washer outside the
wet work area.
► Store the pressure washer indoors.
► Never use your pressure washer if the cas‐
ing around the motor is cracked or dam‐
aged.
■ To reduce the risk of personal injury to the
operator and bystanders:
► Always switch off the pressure washer,
relieve system pressure, lock the spray gun
trigger and disconnect from the power sup‐
ply before assembling, inspecting, cleaning,
maintaining or servicing the pressure
washer.
■ Although certain unauthorized attachments
may fit your STIHL pressure washer, their use
may be extremely dangerous. Only attach‐
ments supplied by STIHL or expressly
approved by STIHL for use with this specific
model are recommended.
► Use only attachments supplied or expressly
approved by STIHL.
► Never modify this pressure washer in any
way.
► Never attempt to modify or override the
pressure washer's controls or safety devi‐
ces in any way.
► Never use a pressure washer that has been
modified or altered from its original design.
■ If the pressure washer is dropped or subjected
to similar heavy impacts:
► Check that it is undamaged, in good condi‐
tion and functioning properly before con‐
tinuing work.
► Check that the controls and safety devices
are working properly.
► Check that the power supply cord has not
been damaged.
6
5 IMPORTANT SAFETY INSTRUCTIONS
► Never work with a damaged or malfunction‐
ing pressure washer. In case of doubt, have
the pressure washer checked by your
authorized STIHL servicing dealer.
■ If the pressure washer is damaged, not work‐
ing properly, has been left outdoors or
exposed to rain, its components may no lon‐
ger function properly and safety devices may
be inoperative. To reduce the risk of personal
injury and property damage:
► Take the pressure washer to your author‐
ized STIHL servicing dealer to be checked
before further operation.
■ Genuine STIHL replacement parts are specifi‐
cally designed to match your pressure washer
and meet safety and performance require‐
ments. Use of parts that are not authorized or
approved by STIHL may cause serious or fatal
injury or property damage.
► STIHL recommends that only identical
STIHL replacement parts be used.
5.6
Power Supply Cord
WARNING
■ Using a damaged power supply cord or plug
may result in fire, electric shock and other per‐
sonal injury or property damage. To reduce
these risks:
► Check the pressure washer's power
supply cord or plug regularly for
damage. If it becomes damaged,
disconnect the pressure washer from
the power supply. Never use a dam‐
aged power supply cord or plug.
► Do not abrade, crush, jerk, or otherwise
abuse or misuse the power supply cord.
Protect it from heat, oil and sharp edges.
► If the power supply cord becomes dam‐
aged, have it replaced by an authorized
STIHL servicing dealer before use. A dam‐
aged power supply cord must be replaced
with an identical STIHL replacement part.
► Unplug the power supply cord when the
pressure washer is not in use.
► Never yank or jerk the power supply cord to
disconnect. To unplug, grasp the plug, not
the power supply cord.
► Make sure the power supply cord is posi‐
tioned and secured or marked so that it will
not be stepped on, tripped over, come in
contact with sharp objects, moving parts, or
otherwise be subjected to damage or
stress.
■ This power tool has a polarized plug (one
blade is wider than the other). This plug will fit
0458-001-8221-B

Publicité

loading