Publicité
Les langues disponibles
Les langues disponibles
8 Assembling the Pressure Washer
► If the spray lance is difficult to insert into the
spray gun, apply a food-safe fitting grease to
the sealing surface on spray gun.
8.3.2
Removing the Spray Gun and Lance
WARNING
■ To reduce the risk of severe injury from high-
pressure spray, always switch off the pressure
washer, shut off the water supply, relieve any
remaining pressure in the system and lock the
spray gun trigger before attempting to remove
or disassemble the spray gun or lance.
To remove the spray gun and lance:
► Switch off the pressure washer,
► Disconnect the pressure washer from the
power supply.
► Shut off the water supply.
► Pull the spray gun trigger to relieve pressure.
► Lock the spray gun trigger.
2
1
► Press the spray lance (1) against the spray
gun (2) and pull out the spray lance.
2
► Press down and hold the locking lever (1).
► Pull out the high-pressure hose (2).
0458-001-8221-B
10.2.
1
8.4
Inserting and Removing the
Spray Nozzle
8.4.1
Inserting the Spray Nozzle
WARNING
■ To reduce the risk of severe injury from unin‐
tended spraying, switch off the pressure
washer, relieve system pressure and lock the
spray gun trigger before attempting to adjust
or change a spray nozzle or other accessory.
WARNING
■ If the high-pressure nozzle is not secure, it can
fly out of the spray lance during operation and
cause injury. Confirm that the nozzle is fixed
securely in the quick-connect coupling.
The pressure washer is offered with two high-
pressure nozzles that can be connected to the
spray lance.
To insert the spray nozzle:
► Switch off the pressure washer,
► Pull the spray gun trigger to relieve pressure.
► Lock the spray gun trigger.
► Remove all sand and debris from the connec‐
tions and couplings.
2
► Attach the high pressure nozzle (1) to the
spray lance (2).
► Push the high pressure nozzle (1) as far as it
will go into the spray lance (2).
► Once inserted, turn the high pressure nozzle
clockwise until it engages.
► If the high pressure nozzle is difficult to insert
into the spray lance, apply a food-safe fitting
grease to the sealing surface on spray lance.
English
10.2.
1
13
Publicité
