Publicité
Les langues disponibles
Les langues disponibles
English
► Collect and dispose of the antifreeze in
accordance with the manufacturer's specifica‐
tions and all federal, state and local laws, reg‐
ulations and ordinances.
NOTICE
■ Freezing temperatures can damage compo‐
nents of the pressure washer. STIHL recom‐
mends storing the pressure washer indoors in
a dry room where it is protected from freezing
temperatures. Relieve all system pressure and
make sure all water is eliminated from the
pump system and hoses before storing.
13 Transporting
13.1
Transporting the Pressure
Washer
When transporting the pressure washer:
1
► Pull the pressure washer by the pushbar (1)
with one hand, or carry the pressure washer
by the pushbar (1) and carrying handle (2).
► When transporting the pressure washer in a
vehicle, ensure that the pressure washer is
standing upright, lying on its back, secured
with lashing straps, belts or a net and cannot
topple over or move.
14 Storing
14.1
Storing the Pressure Washer
WARNING
■ Store the pressure washer indoors in a dry,
secure place that is inaccessible to children
and other unauthorized users,
Improper storage can result in unauthorized
use and damage to the pressure washer,
5.5.
When storing the pressure washer for thirty days
or longer:
► Clean the pressure washer,
► Secure and position the pressure washer to
prevent turnover, impact and damage.
20
2
1
5.5.
15.1.
► Store the pressure washer indoors in a dry
and secure location, out of the reach of chil‐
dren and other unauthorized persons.
► If the pressure washer cannot be stored in a
room where it is protected from freezing tem‐
peratures, protect the pressure washer as out‐
lined above,
12.2.
NOTICE
■ Freezing temperatures can damage compo‐
nents of the pressure washer. STIHL recom‐
mends storing the pressure washer indoors in
a dry room where it is protected from freezing
temperatures. Relieve all system pressure and
make sure all water is eliminated from the
pump system and hoses before storing.
15 Cleaning
15.1
Cleaning the Pressure Washer
WARNING
■ Before carrying out any of the cleaning work
specified in this chapter
measures to reduce the risk of personal injury
from unintended activation: switch off the pres‐
sure washer and disconnect the unit from the
power supply. Relieve all system pressure by
pulling the trigger switch and lock the spray
gun trigger.
To clean the pressure washer:
► Clean the pressure washer's polymer compo‐
nents, couplings and connectors with a slightly
dampened cloth. Do not use abrasives or sol‐
vents that may damage the pressure washer's
polymer components.
► Do not use a pressure washer to clean the unit
or otherwise spray it with water or other liq‐
uids.
15.2
Cleaning the Nozzle and Spray
Lance
A clogged high pressure nozzle can cause
excessive pressure to build in the pump. Clean
the high-pressure nozzle if it becomes clogged.
To clean the nozzle and spray lance:
13 Transporting
6, take certain
0458-001-8221-B
Publicité
