Identifying Warning Signals - Cormach FT 26S Manuel D'utilisation Et D'entretien

Picture F8.2
8 – Handler
9 – Switch
10 – Pedal
8
10
Picture F8.2
Picture F8.3
13 – Carriage
14 – Tool holding arm
15 – Arm lever
17 – Bead breaking disk
18 – Tool
19 – Tool handle
Picture F8.3
During all operations, keep hands and other parts of the body as far as possible from moving parts of the
machine. Necklaces, bracelets and too large clothes, can be dangerous for the operator.
9. IDENTIFYING WARNING SIGNALS
Unreadable and missing warning labels must be replaced immediately.
Do not use the tyre changer if one or more labels are missing. Do not add any object that could prevent the
operator from seeing the labels.
Use the code in this table to order labels you need.
Manuale/Manual/Manuel/Handbuch/Manual – 07/2014
9
Pagina 35