GRAUPNER XS-6 FM RACE Instructions D'utilisation page 45

Defining the GBC Momentary Button System Mode (Set-up Mode)
GBC "Eb" Emergency Steering Button
If the momentary security function is selected in the GBC
"Eb" menu, the security function can be triggered using
the momentary button "C".
„Eb":
TRIM RATE GBC
travel (Emergency Steering
EXP
Button) Pressing button "C"
%
L/F Eb
automatically switches travel
V
R/B
reduction RATE STG to
RATE STM.
The GBC "Eb" function overrides any travel reductions
you have set in the RATE STG menu, and switches
automatically to the Master steering travel you have
selected in the RATE STM menu.
The effect is that maximum programmed Master steering
travel is automatically available for as long as you hold
the momentary button "C" pressed in with your thumb.
Under certain circumstances this switching facility can
prevent a crash in or before a turn, and also allows you
to exploit extreme steering travels to make a rapid course
correction to recover from a driving error.
GBC "2P" = Servo 3 2-point non-proportio-
nal function
AUX „2P":
TRIM RATE AUX
"2P", the screen shows "2P"
EXP
instead of "0", and button "C"
2P
is used to control the 2-point
non-proportional function
R/B
(Servo 3).
The 2-point non-proportional servo function is only active
if you have already selected the function AUX "2P" using
the INC+ or DEC- buttons in the Servo 3 AUX menu
(System Mode).
Press the MODE button once to reach the GBC menu.
Press the INC+ button repeatedly to select the GBC "2P"
menu. Switch the transmitter OFF/ON briefly to activate
the menu GBC "2P". Servo 3 can now be switched
between the two programmed end-points using button
"C".
GBC "0" = Button "C" off (factory default
setting)
TRIM RATE GBC
EXP
GBC „0": T
function (factory default
%
L/F I I0
setting).
V
R/B
All manuals and user guides at all-guides.com
maximum steering
If AUX is set to
Button "C" has no
EProcedure for setting GBC "Eb" Emergency
Steering Button
1. Press MODE and switch transmitter ON to reach Sy-
stem Mode.
2. Press the MODE button repeatedly to reach the GBC
menu.
3. In the GBC menu activate the security mode GBC
"Eb" using the INC+ or DEC- buttons.
4. Switching the transmitter OFF/ON briefly stores the
momentary security emergency button.
5. If you now hold the momentary button "C" pressed in
with your thumb, any reduced steering travel selected
in the RATE STG menu is automatically ignored.
Steering travel is switched to the maximum servo
travel set in Master RATE STM.
Procedure for setting GBC "2P" = Servo 3 2-
point non-proportional function
1. Press MODE and switch transmitter ON to reach Sy-
stem Mode.
2. Press the MODE button to reach the Servo 3 menu
AUX.
3. Press the INC+ button to select the 2-point non-pro-
portional function AUX 2P.
4. Press the MODE button once to reach the Momentary
Button Select menu GBC.
5. Switch the transmitter OFF/ON briefly to store the
button configuration GBC 2P.
TRIM RATE GBC
GBC „2P":
EXP
"C" as 2-point non-proportio-
I I2P
V
L/F
nal function Servo 3 active
R/B
Momentary button "C"
Momentary button
45