GRAUPNER XS-6 FM RACE Instructions D'utilisation page 33

Transmitter controlsender Bedienelemente
LCD screen
Input buttons
Electronic digital adjustor A
(rocker button A)
Electronic digital adjustor B
(rocker button B)
Charge socket
(for rechargeable
batteries only)
Description of receiving system
Empfänger SB6SYN
If you wish to use a different FM receiver, e.g. C6 FM,
the transmitter must be set to the channel corresponding
to the crystal installed in the receiver.
All manuals and user guides at all-guides.com
Aerial
Battery compartment
The receiver features a Syn-
thesizer system which allows
you to set the channel of your
choice within the range Ch 50
to Ch 92. The channel is set
using a small screwdriver
(front channel disc x 10, rear
channel disc x 1).
Electronic trim, throttle
Electronic trim, steering
Throttle/brake lever
Momentary button C
Note: the maximum current capacity of the BEC system
is 1 A!
If you wish to use powerful servos drawing a high current
the BEC system must not be used, since overloading
the circuit will immediately wreck the receiver and the
servos connected to it. If powerful servos are to be used,
e.g. high-performance digital servos, the BEC system
must be disabled by plugging a receiver battery into any
servo socket (1 - 3).
ON/OFF switch
Steering wheel
Steering wheel return
spring adjustment
screw
33