GRAUPNER XS-6 FM RACE Instructions D'utilisation page 42

AUX function: Defining servo 3 Rocker Button A (System Mode)
This is the procedure for accessing the AUX
function in System Mode:
1. Pressing the MODE button and switching the
transmitter on takes you to System Mode, and into
the previously selected model memory.
2. Press the MODE button repeatedly to select the AUX
menu (servo 3).
3. Use the INC+ or DEC- buttons to select the desired
3rd servo function LN (linear), 2P (2-point non-pro-
portional function) or 0 (mixer function for brake).
4. Switching the transmitter OFF/ON briefly accepts the
set parameter into the selected model memory.
AUX display in System Mode
AUX 0
RATE
AUXX
RATE
function. Servo 3 is controlled
M
REV .
by the throttle/brake lever and/
%
0
or the steering function, using
a mixer selected in Set-up
Mode.
AUX 2P
as a 2-point non-proportional
AUX
function using the 2-way rocker
button "A" / "C". Servo 3 can be
2P
influenced by the throttle/brake
lever and/or the steering
function, using a mixer selected
in Setup Mode.
AUX LN
controlled proportionally using
AUX
the 2-way rocker button "A".
Servo 3 can be influenced by
LN
the throttle/brake lever and/or
the steering function, using a
mixer selected in Setup Mode.
42
All manuals and user guides at all-guides.com
AUX function Servo 3 enables you to select
the function assigned to the 2-way rocker
button "A":
If you select function "0", the 3rd channel is controlled
solely via the mixer system "MIX". If you set the MIX
functions to "0", the 3rd channel has no function.
If you select the non-proportional function "2P", the 3rd
channel is controlled as a 2-point non-proportional
function using button "A"; the servo only moves between
the two end-points.
If you select the proportional function "LN" the 3rd
channel is controlled proportionally by button "A".
Caution: The programmed values are not accepted in
System Mode until you switch the transmitter OFF/ON
briefly.
2-way rocker button "A"
switched off. Servo 3 is actuated
only via MIX throttle/brake function
and/or steering function
TRIM RATE
Button "A" without
EXP
REV . NORM
%
V
R/B
2-way rocker button "A" controls the
TRIM RATE
end-points of servo 3 as an auxiliary
EXP EP M
function
Servo 3 is operated
%
L/F
V
R/B
REV . NORM
%
L/F
V
R/B
TRIM RATE
EXP EP MI
REV . NORM
%
L/F
TRIM RATE
V
2-way rocker button "A" provides
EXP
linear control of servo 3 as a pro-
REV . NORM
Servo 3 is
portional servo, moving it to the
%
L/F
desired position within its travel.
V
R/B
TRIM RATE
EXP
REV . NORM
%
L/F
V
R/B
Throttle/brake lever
TRIM RATE
EXP
REV . NORM
%
L/F
V
R/B
TRIM RATE
EXP
%
L/F
V