EUROM Force 1401 Mode D'emploi page 42

Perform the following maintenance tasks after every use:
•
Carefully remove dust, sand or other dirt from the connections (nozzle, extension lance,
jet gun, high-pressure hose and water inlet).
•
Remove the nozzle from the extension lance. Regularly clean the nozzle with the
supplied pin. Flush it thoroughly (against the direction of the high-pressure jet).
Perform the following maintenance tasks regularly:
•
Regularly Vaseline the O-rings of the connectors to prevent them from drying out.
•
Clean the water inlet filter.
Vaseline O-rings
1. Remove the extension lance (Figure 5, pos. 2)
from the jet gun (Figure 5, pos. 1).
2. Remove the nozzle (Figure 5, pos. 4 or 5)
from the extension lance.
3. Apply Vaseline to the O-ring of the nozzle
(Figure 14, pos. 1).
4. Apply Vaseline to the O-ring of the lance
extension (Figure 15, pos. 1).
42
Figure 14
Figure 15