EUROM Force 1401 Mode D'emploi page 39

Start
1. Make sure the ON(I)/OFF(0) switch is in the OFF(0) position (Figure 4, pos. 11).
2. Open the external water supply completely.
3. Unlock the safety lock under the trigger (Figure 3, pos. 3).
4. Squeeze the trigger (Figure 3, pos. 4) for several seconds to remove the air from the
hose.
5. Switch the device on (Figure 4, pos. 11).
Cleaning
WARNING
Be aware of the kickback when squeezing the trigger.
CAUTION
When you stop temporary:
•
•
•
1. Hold the jet gun (Figure 5, pos. 1) with both hands.
2. Aim the jet gun at the object that needs to be cleaned.
3. Squeeze the trigger (Figure 6, pos. 4) and start cleaning.
Change jet angle
CAUTION
The jet angle can only be changed of the adjustable nozzle. The turbo nozzle
has a fixed jet angle.
1. If applicable, release the trigger
(Figure 6, pos. 4).
2. Lock the safety lock under the trigger
(Figure 6, pos. 3).
3. Rotate the head of the nozzle
(Figure 12, pos. 1) to change the jet angle:
•
for a smaller (more powerful jet) turn it
clockwise (Figure 12, pos. 2).
•
for a bigger (less powerful jet) turn it anti-
clockwise (Figure 12, pos. 1).
4. Unlock the safety lock under the trigger.
turn the device off.
close the external water connection.
remove the power plug.
Figure 12
39