Franklin Electric SUBDRIVE CONNECT Serie Manuel Du Propriétaire page 22

ELECTRICAL INSTALLATION
Wiring Guidelines
Branch Circuit Protection
Integral solid state short circuit protection does not provide branch circuit protection. Branch circuit pro-
tection must be provided in accordance with the National Electrical Code and any additional local codes,
or the equivalent. Drive shall be protected by fuse or inverse-time circuit breaker only, rated 300 V, and
a maximum 300% of full load motor output current rating as noted below.
Input (Power) Wire and Fuse Sizing
Input
Model
Voltage
208
SubDrive 15
230
208
SubDrive 20
230
208
SubDrive 30
230
208
SubDrive 50
230
1 1 Based on a 3% voltage drop.
* * 90 °C Insulation only.
NOTE: Minimum breaker amps may vary from AIM Manual specifications because of VFD characteristics.
Output (Motor) Wire Sizing
Model
SubDrive 15
SubDrive 20
SubDrive 30
SubDrive 50
NOTE:
• The use of 600 V minimum rated motor cable is required.
• SubDrive models show cable lengths for highest power motor supported by each model. Refer to
the Franklin Electric AIM Manual when using a smaller motor.
• Maximum allowable wire lengths are measured between the controller and motor.
• Flat-jacketed submersible motor cable is recommended. All splices in the motor cable must be prop-
erly sealed with watertight shrink tubing. Use extreme caution to avoid damaging or compromising
the motor cable insulation during installation or service.
22
Fuse/ AWG Copper Wire Sizes, 75 °C Insulation, and Panel to Drive Cable Lengths (in feet)
Breaker
14 12
Amps
70* 110
15
85 135
-
20 -
85*
-
25 -
40 - -
Motor Family HP (kW)
234 514 xxxx 1.5 (1.1)
234 315 xxxx 2.0 (1.5)
234 316 xxxx 3.0 (2.2)
234 317 xxxx 5.0 (3.7)
10 8 6 4
185 280 450 710
225 345 550 865
115 180 285 450
140 220 345 550
95* 145 235 370
115* 180 285 455
- 150 235
-
115* 185 290
AWG 600 V Copper Wire Sizes, 75 °C Insulation,
and Motor Cable Lengths (in feet)
14 12
420 670
320 510
240 390
- 230
1/0
3 2 1
880 1160 1465
1075 1415 1795
555 730 925
680 895 1130
460 605 765
560 740 935
295 385 490 610
360 470 600 745
10 8
1060 -
810 1000
620 990
370 590 920
1
2/0
- -
- -
- -
735
895
6 4
- -
- -
- -
-