EUROM Force 2201 Plus Mode D'emploi page 48

1. Make sure the device is off.
2. Remove the water supply.
3. Unscrew the garden hose coupling
(Figure 40, pos. 2).
4. Pull out the filter
5. Clean the filter under running water.
6. Put back the filter.
7. Put back the water garden hose coupling.
Clean the nozzle(s)
1. Make sure the device is off.
2. Remove the water supply.
3. Pull the nozzle (Figure
extension lance
4. Clean the nozzle with the cleaning pin
(Figure 41, pos. 1).
5. Flush it thoroughly (against the direction of
the high-pressure jet).
48
(Figure 40, pos. 1).
41, pos. 2) from the
(Figure 25, pos. 2).
Figure 40.
Figure 41.