EUROM Force 2201 Plus Mode D'emploi page 43

4. Squeeze the trigger for several seconds to remove the air from the hose.
5. Switch the device on.
Cleaning
WARNING
Be aware of the kickback when squeezing the trigger.
CAUTION
When you stop temporary:
• turn the device off;
• close the external water connection;
• remove the power plug.
1. Hold the jet gun with both hands.
2. Aim the jet gun at the object that needs to be cleaned.
3. Squeeze the trigger and start cleaning.
Cleaning with floor cleaner
1. Hold the jet gun with both hands.
2. Place the floor cleaner on the surface the be cleaned.
3. Squeeze the trigger and start cleaning.
Change jet angle
CAUTION
The jet angle can only be changed of the adjustable nozzle. The turbo nozzle and
floor cleaner have a fixed jet angle.
1. If applicable, release the trigger.
2. Lock the safety lock under the trigger.
3. Rotate the head of the nozzle
(Figure 34, pos. 1) to change the jet angle:
◦ for a smaller (more powerful jet) turn it
clockwise (Figure
◦ for a bigger (less powerful jet) turn it an­
ti-clockwise (Figure
4. Unlock the safety lock under the trigger.
34, pos. 2).
34, pos. 3).
Figure 34.
43