EUROM Force 2201 Plus Mode D'emploi page 39

High pressure hose reel
1. Attach the handle
the main body (Figure
ST4.8x16 screw
Installation
CAUTION
Place the cleaner as close as possible to the water supply.
CAUTION
The cleaner must be placed upright on a solid, flat and horizontal surface
(handle on top).
Main body
CAUTION
The water hose and female water coupling are not included.
1. Make sure the device is correctly assembled.
2. Make sure the ON(I)/OFF(0) switch is in the OFF(0) position
3. Place the power plug
4. Unroll the high-pressure water hose from the hose reel
5. Connect the water supply to the device
6. You will hear a 'click' when the water supply is correctly connected.
(Figure 29, pos. 1) to
29, pos. 2) with the
(Figure 29, pos. 3).
(Figure 30, pos. 3) into a socket that is easily accessible.
Figure 29.
(Figure
(Figure 30, pos. 2).
(Figure 30, pos. 1).
30, pos. 4).
39