Lubricating The Brew Group - Gaggia Milano CADORNA STYLE RI9600 Mode D'emploi

4219-450-07541 MANUAL GAG. CAD. PLUS EN-FR 120US rev_2.indd 29

Lubricating the brew group

In order to ensure the perfect performance of the machine, it is necessary
to lubricate the brew group. Refer to the following table for the frequency of
lubrication.
Frequency of use
Low
Regular
High
1 Turn off the appliance and disconnect the power cord.
2 Remove the brew group and rinse it using lukewarm water (see the "Cleaning
the brew group under running water" chapter).
3 Apply a thin layer of the lubricant provided around the inserting pin on the
lower part of the brew group.
4 Apply a thin layer of lubricant to the guides, on both sides (see figure).
5 Reinsert the brew group (see the "Reinserting the brew group" chapter).
Note: you can use the lubricant tube multiple times.
Number of beverages prepared
daily
1-5
6-10
>10
English
29
Frequency of
lubrication
Every 4 months
Every 2 months
Every month
23/04/2020 09:31:32