Setting The Language; Measuring The Water Hardness - Gaggia Milano Accademia Mode D'emploi

SettinG tHe lanGUaGe

This setting allows you to choose the operating language of the machine. It also allows you to adjust the parameters of the beverages to
the typical parameters of the country where the machine is used. This is why some languages are diff erentiated also by country.
If no language is selected, you will be requested to select it the next time the machine is started.
1
ITALIANO
ITALIANO CH
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
PORTOGUÊS
Select the desired language by pressing
the arrow buttons ( ) or ( ) .
4
RINSING
When warm-up phase is complete, the
machine performs a rinsing cycle of the
internal circuits . It is possible to interrupt
the cycle by pressing the "STOP" button.

meaSUrinG tHe Water HardneSS

The test strip can only be used for one measurement.
1
Immerse the water hardness test strip
provided with the machine in water for
1 second .
2
ITALIANO
ITALIANO CH
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
PORTOGUÊS
Press the save button .
5
A small quantity of water is dispensed.
Wait for this cycle to be completed
automatically .
2
Intenza Aroma System
A
1 2
Machine water hardness setting
Check the water hardness value and set:
- The machine water hardness level (page 30).
- The Intenza Aroma System (page 7) .
3
HEATING UP...
The machine activates the warming up
phase . Wait until it is completed .
6
15/01/10
10:38
The machine is now ready for use.
C
B
3 4
5