Dispensing Hot Water; How To Lower The Boiler Temperature; Automatic Switch-Off Function; Cleaning And Maintenance - Gaggia Milano NEW CLASSIC RI9480 Mode D'emploi

ENGLISH
leave it to rest for at least 30 seconds. The milk will become
more homogeneous.
Warning! It is important to froth only the milk you
need. The remaining hot milk in the jug should not be
reused; it would damage the quality of the froth and
above all the taste of the cappuccino. It should therefore
be used in other ways.
10. Press the steam button (Fig.1-3).
Pour the frothed milk into the coffee. Decorate as
desired with cinnamon, cocoa, nutmeg.
To prepare another coffee immediately, lower the boiler
temperature by dispensing hot water from the coffee brew
unit (Fig.1-8). Follow the instructions in the paragraph
"How to lower the temperature"; otherwise, the coffee
may taste burnt.
Warning! The steam wand may be very hot during
and after use. To avoid burns, move it only by placing
your fingers on the rubber tip fitted on the steam wand.
Warning! If coffee is brewed without reducing the
temperature by dispensing water, you may get burnt!

DISPENSING HOT WATER

1. Turn the machine on and wait a few minutes until the
correct coffee temperature indicator light (Fig.1-5)
turns on.
2. Place a cup under the professional wand.
3. Slowly turn the steam knob (Fig. 1-7) counter-
clockwise and press the brew button (Fig.1-1) and
the steam button (Fig.1-3) at the same time to allow
for hot water to be dispensed.
4. Once the desired amount of hot water has been dis-
pensed, stop dispensing by pressing the brew button
(Fig.1-1) and the steam button (Fig.1-3) again and turn
the steam knob clockwise.
To prepare another coffee immediately, lower the boiler
temperature by dispensing hot water from the coffee brew
4219-465-02191 MANUAL GAG. CLASSIC-2019 RI9380 EU.indd 16
unit (Fig.1-8). Follow the instructions given in the para-
graph "How to lower the boiler temperature", otherwise
the coffee may taste burnt.
Note. The dispensing operation should last no longer than
60 seconds.
Warning! The steam wand may be very hot during
and after use. To avoid burns, move it only by placing
your fingers on the rubber tip fitted on the steam wand.

HOW TO LOWER THE BOILER TEMPERATURE

1. Do not insert the filter holder.
2. Place an empty cup on the grill.
3. Press the brew button (Fig.1-1) and fill the cup with
water.
4. Press the brew button again (Fig.1-1).
The machine is now ready to brew another coffee.

AUTOMATIC SWITCH-OFF FUNCTION

The machine is equipped with an energy saving func-
tion. After 20 minutes of inactivity, the machine turns off
automatically. To reactivate it, press the on/off button.

CLEANING AND MAINTENANCE

Regular cleaning and maintenance keep the machine in
perfect conditions and ensure perfect coffee flavour, a
constant coffee flow and excellent milk froth for a long
period of time.

Cleaning the steam wand

After each milk frothing:
1. Clean the steam wand with a damp cloth. To clean it
more thoroughly, you can unscrew the nozzle (Fig.13)
and wash it with running water.
2. Open the steam knob, allowing the steam to escape for
one or two seconds to clear the nozzle hole (Fig.1-23).
• 16 •
10/12/2019 09:26:42