Güde UNI MIG 165 SYN Traduction Du Mode D'emploi D'origine page 42

ENGLISH
34
Caution  hot surace!
Protect against humidity Never expose
tool to rain.
Prohibition or persons with a pacemaker!
Keep distance o persons Observe to keep
out o dangerous zone
~ Singlephase transormer with rectier
1
MIG (welding, metalinertgas)
MAG (welding, metalactivegas)
WIG (tungsten inert gas welding)
MMA (electrode welding)
Suitable or welding with an increased
electric risk.
Singlephase alternating current with
rated requency o 50 Hz
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Protect against humidity
This side up
Risk o explosion
Warning against toxic
umes!Not to be used in enc
losed spaces
Requirements for operating sta
The operating sta must careully read the Opera
ting Instructions beore using the appliance.
Qualication: Apart rom the detailed instructions
by a proessional, no special qualication is necessary
or appliance using.
Minimum age: Persons over 16 years o age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision o the trainer during occupational
education.
Training: Using the appliance only requires corre
sponding training by a proessional or the Operating
Instructions. No special training is necessary.
Emergency procedure
Conduct a rstaid procedure adequate to the injury
and summon qualied medical attendance as quickly
as possible. Protect the injured person rom urther
harm and calm them down. For the sake o eventual
accident, in accordance with DIN 13164, a workplace
has to be tted with a rstaid kit. It is essential to
replace any used material in the rstaid kit immedia
tely ater it has been used.
I you seek help, state the ollowing pieces o inor
mation:
1. Accident site
2. Accident type
3. Number o injured persons
4. Injury type(s)