en
No.
Part
1.2
Mechanical seal (kit)
with:
1.11
1.12
1.14
1.21
1.3
Lantern (kit) with:
1.11
1.12
1.14
1.31
1.32
1.33
1.4
Coupling/shaft (kit)
with:
1.11
1.12
1.14
1.41
1.42
Table 11: Spare parts table
13
Disposal
13.1
Oils and lubricants
13.2
Information on the collection of
used electrical and electronic
products
80
Details
No.
3.3
Nut
3.4
Conical spring
4
washer
O-ring
5
Mechanical seal
6
7
Nut
Conical spring
washer
O-ring
Air vent valve
Coupling guard
Lantern
Nut
Conical spring
washer
O-ring
Complete coupling/
shaft
Circlip
Operating fluids must be collected in suitable containers and disposed of in accordance
with the locally applicable guidelines. Wipe up drips immediately!
Proper disposal and appropriate recycling of this product prevents damage to the environ-
ment and danger to your personal health.
Please note the following points to ensure proper handling, recycling and disposal of the
used products in question:
•
Hand over these products at designated, certified collection points only.
•
Observe the locally applicable regulations!
Please consult your local municipality, the nearest waste disposal site, or the dealer who
sold the product to you for information on proper disposal. See www.wilo‑recycling.com
for more information about recycling.
Part
Fastening screws for lan-
tern/pump housing
Fastening screws for motor/
lantern
Nut for motor/lantern fixa-
tion
Washer for motor/lantern
fixation
NOTICE
Disposal in domestic waste is prohibited!
In the European Union this symbol may be included on the product, the
packaging or the accompanying documentation. It means that the elec-
trical and electronic products in question must not be disposed of along
with domestic waste.
Installation and operating instructions • Wilo-Atmos GIGA-I/-D/-B • Ed.01/2023-08
Details
Stopper for pressure
measurement con-
nections
Screw plug for drain
hole