Publicité
Les langues disponibles
Les langues disponibles
RD 16
4.22.1 Block the drums in order to prevent movement of the machine. Do not
4.22.2 Manually release the parking brake. This will prevent excessive wear
4.22.3 Manually release the parking brake. See section Manually Releasing
4.22.4 Attach the tow line to the machine at the tow points.
4.22.5 Attach the tow line to the vehicle that is used to tow the disabled
4.22.6 Remove the blocks from the drums.
4.22.7 Tow the disabled machine at a slow rate of speed to the desired
4.22.8 Once the machine is at the desired location, securely block the drums.
4.22.9 Manually re-engage the parking brake.
4.22.10 Detach the tow lines.
wc_tx001076gb.fm
All manuals and user guides at all-guides.com
Attach the towing device and machine before you release the brakes.
If the engine is running, the machine can be towed for a short distance
under certain conditions. The power train and steering system must be
operable.
The operator must steer the machine that is towed in the direction of
the tow line.
Ensure that all instructions in this section are followed carefully.
When the engine is stopped, additional steps may be required before
the machine is towed. In order to avoid damaging the power train, the
steering system, and the brakes, which may be inoperable, additional
steps may be required.
remove the blocking until the tow vehicle has been positioned and the
tow lines are in place.
and damage to the braking system when towing.
Parking Brake.
machine.
location.
NOTICE: Do not tow the roller long distances or at speeds greater than
3 km/h (1.9 mph). Damage to the drive motors may occur.
This will prevent movement of the machine.
85
Maintenance
Publicité
