Wacker Neuson RD 16 Manuel De L'opérateur page 74

Maintenance
4.10 Engine Oil and Filter
See Graphic: wc_gr003780
4.10.1 Remove the oil filler cap (a) and oil drain plug (c). Drain the oil into a
4.10.2 Reinstall the drain plug and tighten.
4.10.3 Remove and replace the oil filter (b).
4.10.4 Remove the oil filler cap (a) and fill the engine crankcase with
4.10.5 Install the oil filler cap.
All manuals and user guides at all-guides.com
Change the oil and the oil filter (b) every 250 hours. On new machines,
change the oil after first 50 hours of operation. Drain the oil while
engine is still warm.
Note: In the interests of environmental protection, place a plastic sheet
and a container under the machine to collect any liquid which drains
off. Dispose of this liquid in accordance with environmental protection
legislation.
To change oil:
suitable container.
recommended oil. See section Technical Data for oil quantity and type.
74
RD 16
wc_tx001076gb.fm