Publicité
Les langues disponibles
Les langues disponibles
RD 16
3.16 Position of the Operator
3.17 Preparing the Machine for First Use
Preparing for first use
3.17.1 Make sure all loose packaging materials have been removed from the
3.17.2 Check the machine and its components for damage. If there is visible
3.17.3 Take inventory of all items included with the machine and verify that
3.17.4 Attach component parts not already attached.
3.17.5 Add fluids as needed and applicable, including fuel, engine oil, and
3.17.6 Move the machine to its operating location.
wc_tx001075gb.fm
All manuals and user guides at all-guides.com
Safe and efficient use of this machine is the operator's responsibility.
Full control of the machine is not possible unless the operator
maintains the proper working position at all times.
While operating this machine, the operator must:
•
be seated in the operator's seat facing forward
•
wear the seat belt, properly adjusted and latched
•
have both feet on the control deck
•
have one hand on the steering wheel at all times
•
have the other hand free to operate the controls as needed
To prepare your machine for first use:
machine.
damage, do not operate the machine! Contact your Wacker Neuson
dealer immediately for assistance.
all loose components and fasteners are accounted for.
battery acid.
45
Operation
Publicité
