RD 16
1.3.10 Stay clear of the articulated steering joint and the area between the
1.3.11 NEVER use or attempt to repair damaged safety belts or ROPS.
1.3.12 ALWAYS disengage and stow the locking bar for the articulated
1.3.13 ALWAYS check that all controls are functioning properly immediately
1.3.14 ALWAYS remain aware of changing positions and the movement of
1.3.15 Always remain seated and wear the seat belt at all times while
1.3.16 ALWAYS remain aware of changing surface conditions and use extra
1.3.17 ALWAYS use caution when operating the machine near the edges of
1.3.18 Always keep hands, feet, and loose clothing away from moving parts
1.3.19 Store the machine properly when it is not being used. The machine
1.3.20 Always operate machine with all safety devices and guards in place
1.3.21 Do not operate a machine in need of service or repair.
wc_si000399gb.fm
All manuals and user guides at all-guides.com
front and rear frames.
Replace only with Wacker Neuson spare parts.
steering joint before operating the machine. The machine cannot be
steered when the locking bar is engaged.
after start-up! DO NOT operate the machine unless all controls operate
correctly.
other equipment and personnel on the job site.
operating the machine.
care when operating over uneven ground, on hills, or over soft or
coarse material. The machine could shift or slide unexpectedly.
pits, trenches or platforms. Check to be sure that ground surface is
stable enough to support the weight of the machine with operator and
that there is no danger of the roller sliding, falling or tipping.
of the machine.
should be stored in a clean, dry location out of the reach of children.
and in working order. Do not modify or defeat safety devices. Do not
operate machine if any safety devices or guards are missing or
inoperative.
Do not use a cellphone or send text messages while operating this
machine.
Safety Information
13