Wacker Neuson RD 16 Manuel De L'opérateur page 38

Operation
3.9 Operator Presence System
See Graphic: wc_gr002962
WARNING
All manuals and user guides at all-guides.com
The machine is equipped with an "operator presence system". This
system is part of the driver's seat and senses the weight of an operator
in the seat. If the operator is not sitting in the driver's seat, the roller will
NOT drive. If the operator leaves the driver's seat, the brakes will
activate. When the operator sits down again, the forward/reverse
control must be placed in the neutral position before the roller can be
driven or the vibration can be started.
Note: A one-half second delay keeps the system from tripping when
the roller passes over a bump.
If the roller is supplied with an adjustable seat, it can be adjusted as
follows:
• Knob (a) for adjusting the seat tension to the driver's weight.
• Lever (b) for adjusting the distance from the seat to the driving
controls.
Note: Do not change position of the driver's seat while the machine is
moving. The "OPERATOR PRESENCE" safety device will prevent all
machine movements if an operator is not seated.
Always wear the seat belt provided when operating the roller.
a
b
wc_gr002962
38
RD 16
wc_tx001075gb.fm