Motorola PMPN4591 Mode D'emploi page 60

MN008454A01-AB
Chapter 13 : Pocket Insert Installation
Figure 23: The four screws on the rear shroud
3 To detach the shroud, hold the rear shroud along the sides and pull it away from the unit.
Figure 24: Shroud removal
4 Remove the Torx T10 screws on each pocket insert.
Figure 25: Pocket insert screw removal
5 To disengage the pocket insert, slightly lift the back of the pocket insert.
6 To remove the pocket insert, push the pocket insert out towards the front of the unit.
Figure 26: Pocket insert removal
7 Unplug the cable for the pocket insert from the unit and observe the orientation of the
receptacle.
60
2
1