Publicité
Les langues disponibles
Les langues disponibles
Status
Charged to 90 % or more
Charged to 95 % or more
Fault
Standby
•
Battery is waiting to rapid
charge.
•
Battery is too hot, too cold,
or low voltage.
•
Charger is too hot.
Table 11: Charging Indications for Fully Charged IMPRES 2 Battery-Calibration Required, but not
Enabled
Status
Charger Powers On
Battery Detected
Fault
Charger Display
TRICKLE CHARGE
xxxx0mAh yyy%Ptl
CHARGE COMPLETE
xxxx0mAh yyy%Ptl
WARNING: NOT
CHARGEABLE RE-
MOVE& REINSERT
WARNING: HOT
BATTERY WAITING
TO CAL or COLD
BATTERY WAIT-
ING TO CAL or
VERY LOW BAT-
TERY WAITING TO
CHRGE or HOT
CHARGER WAITING
TO CAL
Charger Display
IMPRES 2 CHARGER
IMPRES 2 BATTERY
WARNING: NOT
CHARGEABLE RE-
MOVE& REINSERT
MN008454A01-AB
Chapter 4 : Charger Overview
LED Indicator
Blinking Green
Battery requires calibration,
but calibration is disabled in
charger: Alternating Amber
and Green
Blinking Red
Blinking Amber
LED Indicator
Green for approximately one
second
Battery requires calibration,
but calibration is disabled in
charger: Alternating Amber
and
Green for four seconds.
Blinking Red
25
Publicité
