Keysight U2761A Mode D'emploi page 98

2 Features and Functions
1 Select the Arbitrary waveform function.
2 Set the waveform period.
3 Set the waveform voltage limits.
4 Start the Arbitrary waveform editor.
5 Select the interpolation method.
6 Start waveform editing process.
98
Click Arb to select the Arbitrary function.
Select Period
to set the period for the waveform.
For example, set the period of the waveform to 10 ms.
Select HiLevel
voltage levels that can be reached while editing the waveform. The upper limit
must be greater than the lower limit.
For example, set the upper limit to 2.0 V and the lower limit to 0 V.
Select Non Built-in Waveform from the Arbitrary's drop down list
and click
Click to enable or disable linear interpolation between the user-defined
points. With interpolation enabled (default), the waveform editor makes a
straight-line connection between the points. With interpolation disabled, the
waveform editor maintains a constant voltage level between the points and
creates a "step-like' waveform.
Click to begin the freehand draw mode or
To enable or disable the grid reference, click
desired waveform. To edit the waveform, click either
to edit point(s),
graph.
and use the numeric keypad or numeric drop down
and Lolevel
to start the Arbitrary waveform editor.
to delete point(s), or
to set the high and low
to enable line draw mode.
. Then, start drawing the
to add line/point(s),
to clear current Arbitrary
Keysight U2761A User's Guide