Keysight U2761A Mode D'emploi page 75

FSK "Hop" Frequency
The maximum alternate (or "hop") frequency depends on the function selected as
shown below. The default "hop" frequency is 100 Hz for all functions.
Table 2-7 "Hop" frequency
Function
Sine
Square
Ramp, Triangle
Arbitrary
Only Square wave with a 50% duty cycle is available for the Internal FSK
modulating waveform.
Soft Front Panel Operation
On the Hop Frequency panel as shown in
frequency value and select the unit from the drop down list.
Remote Interface Operation
Keysight U2761A User's Guide
Minimum frequency
1 Hz
1 Hz
1 Hz
1 Hz
FSKey:FREQuency <frequency>
Features and Functions
Maximum frequency
20 MHz
20 MHz
200 kHz
200 kHz
2 MHz (Option U2010A)
Figure 2-22, input the desired hop
2
75