Keysight U2761A Mode D'emploi page 48

2 Features and Functions
Remote Interface Operation
The APPLy command automatically sets the symmetry to 100%.
Output Control
You can disable or enable the soft front panel output control. By default, the
output is disabled at power-on. When enabled, the Output
illuminated.
If an excessive external voltage is applied to the device output connector, the
output will be disabled. To re-enable the output, remove the overload from the
output connector and click Output
Soft Front Panel Operation
Click Output
Figure 2-11
48
FUNCtion:RAMP:SYMMetry <percent>
to enable or disable the output as shown in
Panel view of the output section
to enable the output.
Keysight U2761A User's Guide
button is
Figure 2-11.