Keysight U2761A Mode D'emploi page 92

2 Features and Functions
Internal Triggering
In the Internal trigger mode, the U2761A continuously performs frequency sweep
(as specified by the sweep time). This is the default trigger source for both soft
front panel and remote interface use.
Soft Front Panel Operation
On the Trigger Setup panel as shown in
down list
Remote Interface Operation
Manual Triggering
In the Manual (software) triggering mode, you can manually trigger the U2761A
by clicking Trigger
the button. The Trigger
Manual trigger.
Soft Front Panel Operation
On the Trigger Setup panel as shown in
down list
Remote Interface Operation
When the BUS source is selected, send the TRIG or *TRG command to trigger the
U2761A.
92
Figure
at the Source panel.
TRIGger:SOURce IMMediate
. The U2761A initiates one sweep each time you click
button is illuminated while the U2761A waits for a
Figure
at the Source panel.
TRIGger:SOURce BUS
2-28, select Internal from the drop
2-28, select Manual from the drop
Keysight U2761A User's Guide