Keysight U2761A Mode D'emploi page 6

General Safety Information
The following general safety precautions must be observed during all phases of
operation of this instrument. Failure to comply with these precautions or with
specific warnings elsewhere in this manual violates safety standards of design,
manufacture and intended use of the instrument. Keysight Technologies assumes
no liability for the customer's failure to comply with these requirements.
– Do not operate the product in an explosive atmosphere or in the presence
WARNING
– Do not use the equipment if it does not operate properly. Have the
– The input voltage range for the instrument is 12 VDC. Mains supply
– Observe all markings on the instrument before connecting any wiring to
CAUTION
– Use the device with the cables provided.
– Repair or service that is not covered in this manual should only be
– Clean the case with a soft, lint-free, slightly dampened cloth. Do not use
6
of flammable gases, fumes, or wet environments.
equipment inspected by qualified service personnel(s).
voltage fluctuations are not to exceed ±10% of the nominal supply
voltage.
the instrument.
performed by qualified personnel(s).
detergent, volatile liquids, or chemical solvents.
Keysight U2761A User's Guide