Keysight U2761A Mode D'emploi page 50

2 Features and Functions
Example 3, To output a Square wave
-> *CLS; *RST
-> APPL:SQU 2000,5 VPP,0
-> FUNC:SQU:DCYC 30
-> OUTP ON
Example 4, To output a Ramp wave
-> *CLS; *RST
-> FUNC RAMP
-> VOLT 5 VPP
-> FREQ 10000
-> VOLT:OFFS 0
-> FUNC:RAMP:SYMM 50
-> OUTP ON
50
//To reset the U2761A to default power-on
state, this command can be ignored if this
operation is not required.
//Sets the output to Square wave, frequency
2 kHz, amplitude 5 Vpp, offset 0.
//Changes the duty cycle to 30%.
//Turns on output.
// To reset the U2761A to default power-on
state, this command can be ignored if this
operation is not required.
// Sets the output to Ramp wave.
// Sets the output amplitude to 5 Vpp.
// Sets the output frequency to 10 kHz.
// Sets the output offset to 0.
// Changes the symmetry to 50%.
// Turns on output.
Keysight U2761A User's Guide