Keysight U2761A Mode D'emploi page 56

2 Features and Functions
Soft Front Panel Operation
Click Mod
AM waveform, configure the settings for the carrier frequency, modulating
frequency, depth, output amplitude, offset voltage, and the desired waveform.
Figure 2-15
Remote Interface Operation
Carrier Waveform
The AM carrier waveform consists of Sine, Square, Ramp, Triangle, or Arbitrary
waveform. The default waveform is Sine wave. You cannot use Pulse or DC as the
carrier waveform.
Soft Front Panel Operation
For Arbitrary waveform, select Arb
and then select the desired waveform from the drop down list
shown in
56
and then select AM
Panel view of AM
AM:STATe {0|OFF|1|ON}
Figure 2-16.
as shown in Figure 2-15. To output the
at the top panel as shown in
Keysight U2761A User's Guide
Figure 2-2
as