Keysight U2761A Mode D'emploi page 68

2 Features and Functions
Figure 2-20
Remote Interface Operation
Carrier Waveform
The PM carrier waveform consists of Sine, Square, Ramp, Triangle, or Arbitrary
waveform. The default waveform is Sine wave. You cannot use Pulse or DC as the
carrier waveform.
Soft Front Panel Operation
For Arbitrary waveforms, click Arb
and select the desired waveform from the drop down list
Figure
Remote Interface Operation
You can also use the APPLy command to select the function, frequency,
amplitude, and offset.
68
Panel view of PM
2-16.
FUNCtion {SINusoid|SQUare|RAMP|USER}
PM:STATe {0|OFF|1|ON}
at the top panel as shown in Figure 2-2
as shown in
Keysight U2761A User's Guide