Keysight U2761A Mode D'emploi page 34

2 Features and Functions
Output Configuration
Introduction
This section contains the information to help you configure the U2761A for
outputting waveforms. You may not need to change some of the parameters
discussed here, but they are provided so that you will have accessibility when
needed.
Output Function
The U2761A can output five standard waveforms (Sine, Square, Ramp, Triangle,
and Pulse), and DC. You can select one of the three built-in Arbitrary waveforms
or create your own custom waveforms. In addition, you can internally modulate
Sine, Square, Ramp, Triangle, and Arbitrary waveforms using AM, FM, PM, FSK,
PSK, or ASK. The linear or logarithmic frequency sweeping is available for Sine,
Square, Ramp, Triangle, and Arbitrary waveforms.
The table below shows which output functions are allowed with modulation and
sweep. Each "V" indicates a valid combination. If you change to a function that is
not applicable for modulation, or sweep; then the modulation or mode will be
disabled.
Table 2-1 Output functions
AM, FM, PM, FSK, PSK, ASK Carrier
AM, FM, PM Internal Modulation
FSK, PSK, ASK Internal Modulation
Sweep Mode
34
Sine Square Ramp
V V
V V
V
V V
Triangle Pulse
V V
V V
V V
Keysight U2761A User's Guide
DC Arbitrary
V
V
V