Keysight U2761A Mode D'emploi page 59

Modulating Waveform Frequency
The range of the modulating waveform frequency is 2 mHz to 20 kHz. The default
modulating waveform frequency is 100 Hz.
Soft Front Panel Operation
On the Mod Frequency panel as shown in
modulating frequency value and select the unit from the drop down list.
Remote Interface Operation
Modulation Depth
The modulation depth is expressed in percentage and represents the extent of the
amplitude variation. At 0% depth, the output amplitude is half of the selected
value. At 100% depth, the output amplitude equals the selected value.
The range of the modulation depth is 0% to 100%. The default modulation depth
is 100%.
At 100% depth, the maximum output of the U2761A will not exceed ±2.5 V peak
NOTE
(into a 50 load).
Soft Front Panel Operation
On the Depth panel as shown in
value from the drop down list.
Remote Interface Operation
Keysight U2761A User's Guide
AM:INTernal:FREQuency <frequency>
Figure 2-15, select the desired modulating depth
AM:DEPTh <depth in percent>
Features and Functions
Figure 2-15, input the desired
2
59