Publicité
Les langues disponibles
Les langues disponibles
Features and Functions
2
External Triggering
In the External trigger mode, the U2761A accepts a hardware trigger applied to
the device Trig In connector. The U2761A initiates one sweep each time Trig In
receives a TTL pulse with the specified edge.
Also refer to
"Trigger Input Signal"
on page 94.
Soft Front Panel Operation
On the Trigger Setup panel as shown in
Figure
2-28, select External from the drop
down list
at the Source panel.
To specify whether the U2761A is triggered on the rising or falling edge, select
Positive
for triggering on the rising edge and Negative
for
triggering on the falling edge.
Remote Interface Operation
TRIGger:SOURce EXTernal
Use the following command to specify whether the U2761A is triggered on the
rising or falling edge.
TRIGger:SLOPe {POSitive|NEGative}
Keysight U2761A User's Guide
93
Publicité
