Keysight U2761A Mode D'emploi page 84

2 Features and Functions
Carrier Frequency
The maximum carrier frequency depends on the function selected as shown
below. The default is 1 kHz for all functions.
Table 2-9 Carrier frequency for ASK
Function
Sine
Square
Ramp, Triangle
Arbitrary
Only Square wave with a 50% duty cycle is available for the Internal ASK
modulating waveform.
Soft Front Panel Operation
On the Frequency panel as shown in
and select the unit from the drop down list.
Remote Interface Operation
You can also use the APPLy command to select the function, frequency,
amplitude, and offset.
84
Minimum frequency
1 Hz
1 Hz
1 Hz
1 Hz
Figure
FREQuency <frequency>
Maximum frequency
20 MHz
20 MHz
200 kHz
200 kHz
2 Mhz (Option U2010A)
2-3, input the desired frequency value
Keysight U2761A User's Guide