Keysight U2761A Mode D'emploi page 64

2 Features and Functions
Modulating Waveform
The modulating waveform consists of Sine, Square, Ramp, Negative Ramp
(Nramp), Triangle, Noise, or Arbitrary waveform. The default modulating
waveform is Sine wave.
Soft Front Panel Operation
Select the desired modulating waveform from the drop down list
shown in
Remote Interface Operation
Modulating Waveform Frequency
The range of the modulating waveform frequency is 2 mHz to 20 kHz. The default
modulating waveform frequency is 100 Hz.
Soft Front Panel Operation
On the Mod Frequency panel as shown in
modulating frequency value and select the unit from the drop down list.
Remote Interface Operation
64
– Square has 50% duty cycle
– Ramp has 100% symmetry
– Triangle has 50% symmetry
– Negative Ramp has 0% symmetry
Figure 2-18.
{SINusoid|SQUare|RAMP|NRAMp|TRIangle|USER}
FM:INTernal:FREQuency <frequency>
FM:INTernal:FUNCtion
Figure 2-18, input the desired
Keysight U2761A User's Guide
as