Publicité
Les langues disponibles
Les langues disponibles
–
Belt drive covers (
These protection units protect against injuries through moving parts.
The equipment must not be operated with damaged covers or without correctly attached covers.
–
Exhaust protection grill (
The engine/exhaust becomes very hot. The protection grill protects the user against burns.
Do not operate the machine without the exhaust protection grill.
The safety devices must not be modified.
•
Do not change the basic settings of the engine or operate the engine at excessive speed.
•
During the starting process, do not switch on the drive if available.
When you start the machine, make sure that your feet are at a sufficiently safe distance away from the cutting
blades.
When the engine or mowing blade is switched on, the machine must not be tilted on end, if necessary it must be
tilted so that the cutting tool is pointing in the direction away from the user, but only as far as absolutely
necessary.
Never put your hands or feet near or under revolving parts. Always make sure that your hands or feet do not get
under the housing. Always maintain a safe distance from the ejector opening.
Stop the motor, remove the spark plug connector, check that all moving parts have come to a complete standstill
and, if there is one, remove the ignition key:
–
when leaving the machine;
–
before you check, clean or carry out any work on the machine;
–
before you eliminate jams or blockages in the ejection channel;
–
before you remove a foreign body;
–
if the machine starts to vibrate strangely.
•
If a foreign object has been encountered or if the machine becomes blocked, e.g. by driving onto an obstacle, a
specialist dealer must check whether parts of the machine have been damaged or deformed. Any necessary repairs
must also be carried out by an authorized specialist workshop.
•
If you notice unusually strong vibrations in your machine, you must have it checked by an authorized dealer.
Switch the mowing blade off, in the case of equipment without blade brake stop the engine, always make sure
the cutting tool has come to a standstill:
–
when driving outside the lawn on paths or streets;
–
when you wish to adjust the cutting height;
–
before you remove the grass collecting bag;
–
before you remove the mulching plug.
•
Always stop the engine and make sure the ignition key (if present) has been removed:
–
if you have to lift or tilt the mower e.g. for transport purposes;
–
if you have to leave the machine for a short time;
–
before you fill it with fuel.
•
If the engine is equipped with a petrol shut-off valve, this should be closed after mowing.
Maintenance and storage
•
Ensure that all screws have been tightened securely and that the machine is in a safe working condition.
The ejection flap may only be opened and the grass collecting bag moved or the mulching plug removed with
the engine or mowing blade switched off.
Never store a machine which still contains petrol inside a building where petrol fumes may come into contact
with naked flames or sparks or where they may ignite.
The engine and exhaust reach very high temperatures during operation.
Allow the machine to cool down for at least 15 minutes before starting any maintenance or cleaning work.
•
To reduce the risk of fire, keep the motor, silencer (exhaust) and fuel tank free from grass, leaves or leaking oil (grease).
When placing on the side, ensure that no oil or fuel comes out of the machine. Fire hazard!
Allow the motor to cool down before storing the machine in a closed room.
Do not store the machine in the vicinity of open flames or fire sources such as boilers or heaters.
All manuals and user guides at all-guides.com
), engine covers (
)
14
5
)
13
7
GB
Publicité
