Electrical Installation; Luminosity Configuration; Function Of The Chronometer - Bodet Style 5S Manuel D'installation Et De Mise En Service

II - Electrical installation
Note : The data network must be PoE (802.3af, class 3):
clock.
The cable of the control pad can be extended or shortened on-site according
to the installation.
The programming and the regulation of the luminosity are realized with 2
keys of programming SELECT and +..
Prise RJ45 :
Ethernet network
Programmation Key
SELECT et +
Prise RJ12 : Unused
III - Luminosity configuration
- The configuration luminosity can be made when the clock Style is in normal functioning, that is
when she's not either in the menu of configuration, or in the menu of putting at the hour.
- The successive supports on the touch «+» allow to select directly, among four proposed levels, the
luminosity of display the best adapted to the ambient lighting.
IV - Function of the chronometer
The timer is controlled by the key pad while the clock (time of day) keeps running regardless of the
operating mode.
The timer works as a stopwatch (counting forward).
Available controls keys :
- HOUR (5) key with LED:
* selects the clock mode display,
* this key is operational even when the timer is running (does not stop the timer).
- STOPWATCH (7) key with LED:
* selects the timing operating mode timer (counting from 0:00 00 to
23:00 00).
- START/STOP (3) key:
* starts and stops the timer.
* this key is operational only in the timing mode.
- RESET (2) key:
* this key is operational only in the timing mode and when the timer is
stopped.
* Pressing this key once resets the counter.
if not, use a PoE injector to power the
17
T+
Blanc
T- Marron
Vert
Alim
Jaune
Control pad cabling
Passage of cables
towards connectors
7
RESET
5
2
3
STOP
START
BT TIMER