Kessel SonicControl Instructions D'utilisation Et De Maintenance page 61

8.5 Settings menu
Systeminfo Information
Servicing
Settings
395-016
Switch unit
8.5.1 Parameters
Changes to default parameter settings (refer also to 3.3)
Note: Every change is immediately accepted when the OK key is pressed. In
addition, on quitting this menu it is possible to save these values in the profile
memory under a separate name.
Parameters
8.5.2 Profile memory
Loading of the values accepted on initialisation and of the values added under
Profile memory
a new name (see 8.5.1). Here, a profile can be saved (saves the parameters cur-
rently set) or loaded.
Date / time
8.5.3 Date/time Setting the current date and time.
Standard
8.5.4 Standard
Nominal size
8.5.5 Nominal size selection of grease separators NS
8.5.6 Communication
Communication
Input / change of the station name, the device number, the modem type, the
Language
PINS and the number of the mobile phone to which possible malfunctions can be
sent by text message (for a detailed description see separate operating instruc-
Expert mode
tions).
Reset 8.5.7 Language Display / change the language.
8.5.8 Expert mode setting of parameters through factory customer services
8.5.9 Reset
Reset the switch unit to the default setting (operating hours are not reset).
61
2020/01